Victron EasySolar-II 48/6k5/100-32 MPPT 250/100 GX – all-in-one inverter/charger with MPPT

Victron Energy EasySolar-II 48/6k5/100-32 MPPT 250/100 GX is an integrated 48 V energy system combining an inverter/charger, SmartSolar MPPT solar charge controller and GX control device in one enclosure. The factory-integrated components reduce wiring requirements and simplify the installation of off-grid, backup-power and energy-storage systems.

The unit converts power from a 48 V battery bank into stable 230 V AC power, charges the battery from the grid or a generator, and manages a photovoltaic array of up to 5800 W. The integrated GX device provides a local display, Wi‑Fi and multiple communication interfaces for monitoring, configuration and integration with Victron systems and VRM Remote Management.

Key benefits

• Combines an inverter/charger, MPPT solar charger and GX control device in one enclosure.
• Up to 6 kW of continuous inverter output at 25°C and maximum inverter efficiency of 96%.
• Time-limited output of up to 6.5 kW for 3 hours and 8 kW for 1 hour during cold-start operation.
• SmartSolar MPPT 250/100 with a maximum charge current of 100 A and maximum PV power of 5800 W.
• Supports PV arrays with a maximum open-circuit voltage of 250 V.
• PowerControl and PowerAssist optimise the use of available AC power.
• Supports lithium, lead-acid, zinc-bromine and other compatible battery technologies through configurable charging parameters.
• Parallel and three-phase operation is supported through VE.Bus.
• Includes remote on/off, a programmable relay and an auxiliary AC output.
• Suitable for systems combining grid power, generator input, photovoltaics and backup supply for critical loads.

Applications

• Off-grid and hybrid solar systems with 48 V battery banks.
• Residential and small commercial energy-storage and self-consumption systems.
• Backup-power installations for protection against grid outages.
• Generator-supported systems requiring PowerControl, PowerAssist and automated control.
• Stationary off-grid energy systems with remote monitoring.

Technical specifications

• Manufacturer: Victron Energy
• Model: EasySolar-II 48/6k5/100-32 MPPT 250/100 GX
• SKU: PMP482657010
• EAN: 8719076073987
• Nominal battery voltage: 48 V
• DC input voltage range: 38–60 V
• Inverter output: 230 VAC ±2%, 50 Hz ±0.1%
• Continuous output power at 25°C: 6 kW
• Continuous output power at 40°C: 5.7 kW
• Continuous output power at 65°C: 4.6 kW
• Time-limited cold-start power: 6.5 kW for 3 hours; 8 kW for 1 hour
• Peak power: 11 kW for 1 minute
• Maximum inverter efficiency: 96%
• Zero-load power: 25 W
• Zero-load power in AES mode: 14 W
• Zero-load power in Search mode: 7 W
• Maximum AC input current: 50 A
• Transfer switch: 50 A
• AC input: 187–265 VAC, 45–65 Hz
• Charger: maximum battery charge current of 100 A at 25°C; 95 A at 40°C
• Absorption charge voltage: 57.6 V
• Float charge voltage: 55.2 V
• Storage-mode voltage: 52.8 V
• Supported battery technologies: lithium, lead-acid, zinc-bromine and other compatible technologies
• Battery temperature sensor: optional, ASS000001000
• Solar charger: SmartSolar MPPT 250/100-Tr
• Maximum MPPT charge current: 100 A
• Maximum PV power: 5800 W
• Maximum PV open-circuit voltage: 250 V
• Maximum MPPT efficiency: 99%
• MPPT self-consumption: 20 mA
• Protections: output short circuit, overload, excessive battery voltage, low battery voltage, overheating, 230 VAC on the inverter output and excessive input-voltage ripple
• Operating temperature: -40°C to +65°C, fan-assisted cooling
• Maximum altitude: 2000 m
• Maximum non-condensing humidity: 95%
• Ingress protection: IP21
• Enclosure material and colour: aluminium, blue RAL 5012
• Battery connection: M8 bolts
• PV connection: M6 bolts
• AC connection: screw terminals for cables up to 16 mm²
• Dimensions (H × W × D): 670 × 320 × 270 mm
• Weight: 40 kg
• Standards: EN-IEC 60335-1, EN-IEC 60335-2-29, EN-IEC 62109-1, EN-IEC 62109-2, EN 55014-1, EN 55014-2, EN-IEC 61000-3-2, EN-IEC 61000-3-3, IEC 61000-6-1, IEC 61000-6-2 and IEC 61000-6-3

Connectivity and control

• Integrated GX control device with a 2 × 16-character display.
• Interfaces include BMS-Can, VE.Can, USB, Ethernet, VE.Direct and Wi‑Fi.
• VE.Bus port for parallel and three-phase operation, remote monitoring and system integration.
• Compatible with supported BMS systems and DVCC-based battery control.
• Wi‑Fi connectivity for setup and parameter viewing from a mobile device or other Wi‑Fi client.
• Integration with Victron Remote Management for remote system monitoring.
• The SmartSolar MPPT section is configured through VictronConnect; full inverter/charger configuration is performed with VEConfigure.
• Supports remote on/off and a programmable relay for alarm, DC undervoltage or generator start/stop functions.