Victron Energy Lynx Power In (M10) – modular DC busbar

Victron Energy Lynx Power In (M10) is a modular positive and negative DC busbar for connecting batteries, chargers and DC loads to a Victron Energy Lynx DC distribution system. It provides four connections for batteries or DC equipment and includes a dedicated ground connection.

Lynx Power In (M10) can be used on its own or interconnected with other M10 Lynx modules to create an organised and expandable DC distribution system. It does not contain fuses, so all connected batteries, chargers and loads must be protected with suitable external fusing.

Key benefits

• Modular positive and negative DC busbar for Victron Energy Lynx systems.
• Four connections for batteries, chargers or DC loads.
• Continuous current rating of up to 1000 A for 12, 24 or 48 V systems.
• M10 busbar connections for interconnecting other Lynx M10 modules.
• Tinned copper busbars for dependable high-current connections.
• Compact ABS enclosure with IP22 protection.
• Suitable for expandable systems using Lynx Distributor, Lynx Shunt VE.Can and Lynx Smart BMS modules.
• No integrated fuses, allowing external protection to be selected for the specific system design.

Applications

Victron Energy Lynx Power In (M10) is designed for stationary and mobile DC power systems, including off-grid solar installations, inverter and inverter/charger systems, campervans and caravans, marine applications, professional vehicles and other installations built with Lynx M10 modules.

Technical specifications

• Product: Lynx Power In (M10)
• SKU: LYN020102010
• Type: modular DC busbar
• Voltage range: 9–60 VDC
• Continuous current rating: 1000 A
• Busbar connections: M10
• Cable connections: M8
• Battery or DC equipment connections: 4
• Busbar material: tinned copper
• Busbar dimensions: 8 × 30 mm
• Enclosure material: ABS
• Enclosure dimensions (H × W × D): 290 × 170 × 80 mm
• Weight: 2.1 kg
• Operating temperature: −40 °C to +60 °C
• Storage temperature: −40 °C to +60 °C
• Humidity: maximum 95%, non-condensing
• Protection class: IP22
• Fuses: no integrated fuses; connected circuits require suitable external protection

Connections and configuration

Lynx Power In (M10) can be used as a standalone busbar or interconnected on either side with other Lynx M10 modules. M10 modules cannot be directly connected to Lynx M8 modules. In systems containing a Lynx Shunt VE.Can or Lynx Smart BMS, batteries are connected on the battery side, while DC loads and chargers are connected on the system side.

All cables must be sized for the maximum current of the relevant circuit and protected with suitable external fuses. M8 cable lugs are used for the electrical connections.